Fuji Xerox DocuPrint CM215 Series User Manual page 400

Error Code
026-721
026-722
026-723
026-750
026-751
026-752
027-446
027-452
031-521
031-526
031-529
031-530
031-533
031-534
031-535
031-536
031-537
031-555
031-556
031-557
031-558
031-571
031-574
031-575
031-576
031-578
400 Troubleshooting
What You Can Do
Press the button to clear the message. Check if the USB memory device is write-
protected or gets any disk problem.
Press the button to clear the message. Check if the path and file name to save the
data is too long.
Press the button to clear the message. Check if the interface cable is securely
connected, or restart the application you use.
Press the button to clear the message. Check if the interface cable is securely
connected.
Change IP address to avoid duplication. Turn off the printer, and turn it on again.
Press the button to clear the message. Check if the access setting to the SMB server
is correct by contacting your server administrator.
Press the button to clear the message. Check if the domain name of the SMB server
is correct. Check DNS connection, or check if the name of the forwarding destination
server is registered with DNS.
Press the button to clear the message. Check if the Ethernet cable is properly
connected and if the password for the SMB server is correct.
Press the button to clear the message. Check if the working path setting to the SMB
server is correct.
Press the button to clear the message. Check the following:
• If the file name you specified is not used by other users.
• If file or folder that has the same name as the one you specified already exists.
• If the SMB server encounters any write-protection or disk problem.
Press the button to clear the message. Check if the SMB server encounters any
write-protection or disk problem.
Press the button to clear the message. Check if the storage location has free space.
Press the button to clear the message. Check if the network is properly connected.
Press the button to clear the message. Check if the SMB server encounters any
write-protection or disk problem.
Press the button to clear the message. Check the following:
• If the file name you specified is not used by other users.
• If file or folder that has the same name as the one you specified already exists.
Press the button to clear the message. Check if the access setting to the SMB server
is correct by contacting your server administrator.
Press the button to clear the message. Check if the Ethernet cable is properly
connected.
Press the button to clear the message. Check if the domain name of the FTP server
is correct.
Press the button to clear the message. Check if the host name setting to the FTP
server is correct.
Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
Press the button to clear the message. Check if the Ethernet cable is properly
connected and if login name (user name) and password for the FTP server are correct.