Resetting To Factory Defaults - Fuji Xerox DocuPrint CM215 Series User Manual

Resetting to Factory Defaults

After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– For the DocuPrint CM215 f/CM215 fw, to initialize the network settings, refer to
– For the DocuPrint CM215 fw, to initialize the wireless network settings, refer to
CM215 fw Only)" on page
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Initialize NVM, and then press the
5
Select System Section to initialize the menu parameters, and then press the
For the DocuPrint CM215 f/CM215 fw, select User Fax Section to initialize the
data for fax, and select User Scan Section to initialize the
6
Select Yes, and then press the
The printer restarts automatically to apply the settings.
303.
button.
Using the Operator Panel Menus and Keypad
button.
button.
button.
Address Book
"Initialize NVM" on page
"Reset Wireless (DocuPrint
button.
Address Book
data for e-mail.
305.
343