• mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the
Values:
Millimeters (mm)*
Inches (")
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
On*
• Power On Wizard
Purpose:
To perform initial settings for the printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 52
Values:
Yes
No*
Maintenance
Use the Maintenance menu for maintenance work including initialization of the NVM (non-volatile
memory).
NOTE:
•
Asterisk (*) is the factory default setting.
• F/W Version
Purpose:
To display the version of the controller.
• Paper Density
Purpose:
To adjust the paper type.
Values:
Plain
316
Using the Operator Panel Menus and Keypad
Specifies the default measurement unit.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Performs the initial settings for the printer.
Does not perform the initial settings for the printer.
Lightweight
Heavyweight*
operator
panel.