Sharpness - Fuji Xerox DocuPrint CM305 df User Manual

Sharpness

To adjust the sharpness to make the copy image sharper or softer than the original.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 162
• "Making Copies From the ADF" on page 164
2
Press the Copy button.
3
Select Sharpness, and then press the
4
Select the desired setting, and then press the
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Sharper
Normal*
Softer
5
Press the Start button to begin copying.
button.
button.
Makes the copy image sharper than the original.
The color clarity of the image is the same as the original.
Makes the copy image softer than the original.
Copying 178