Network
Dell#
show ip bgp dampened-paths
View BGP routes that are dampened (non-active).
Syntax
show ip bgp [ipv4 unicast] dampened-paths
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip bgp damp command shown in the
Information
following example.
Field
Network
From
Reuse
Path
Example
Dell>show ip bgp dampened-paths
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Dell>
show ip bgp detail
Display BGP internal information for the IPv4 Unicast address family.
Syntax
show ip bgp [ipv4 unicast] detail
Defaults
none
Border Gateway Protocol IPv4 (BGPv4)
Next Hop
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the network ID to which the route is dampened.
Displays the IP address of the neighbor advertising the
dampened route.
Displays the hour:minutes:seconds until the dampened
route is available.
Lists all the ASs the dampened route passed through to
reach the destination network.
Network
From
Metric
LocPrf
Reuse
Path
Weight Path
369