Scsi Problems - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

2.5.10 SCSI Problems

Some common causes and solutions for SCSI device problems are listed in the following table.
Problem
System with IDE and SCSI drives will
not boot from SCSI hard drive
System without an IDE drive will not
boot from a SCSI drive
Table 2-27
SCSI Problems
Cause
The IDE drive is not disabled through
the Configuration utility.
The SCSI drive is not configured
correctly.
Solution
Run the Configuration utility and disable the primary IDE
drive.
Ensure that drive cabling and jumpers are set correctly. To
boot a SCSI drive, the drive ID number must be set to 0.
Compaq Deskpro 2000 2-35