5.2.8
Expansion Board
The Compaq Deskpro 2000 Series Minitower Personal Computer contains five expansion slots, which
are located on the riser board.
Two PCI (Peripheral Component Interconnect) expansion slots
1
2
One PCI/ISA (Industry Standard Architecture) shared expansion slot
3
Two ISA expansion slots
Figure 5-62. Five Expansion Slots in the Riser Board
To remove an expansion board, complete the following steps:
1. Perform preparation procedures described in Section 5.2.3.
2. Remove the access panel (Section 5.2.6.1).
3. Remove the riser brace as described in section 5.2.7.
4. If cables are attached to the expansion board, disconnect them.
5-68
Removal and Replacement Procedures