Drive Positions - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

Ref. Component
1
Power Switch
2
Power-On Light
3
Hard Drive Activity Light
4
CD-ROM Headphone Jack
5
CD-ROM Headphone Volume Control
6
CD-ROM Drive Activity Light
7
Diskette Drive Activity Light
8
Diskette Eject Button
9
CD-ROM Eject Button
10
CD-ROM Emergency Eject Hole
The lights on the computer provide information about the computer's operation. When the power switch
1 is turned on, the power-on light
When the hard drive light
reading information from the disk or storing information on the disk.

1.5.2 Drive Positions

The computer has space available for a combination of up to five mass storage devices. They may be
installed in various configurations, including those shown below.
Table 1-6
Lights and Controls
Function
Turns the computer on and off.
Turns on when the computer is turned on.
Turns on when the hard drive is reading or writing.
Connects a headphone to the CD-ROM drive.
Increases and decreases the CD-ROM headphone volume.
Turns on when the CD-ROM drive is reading.
Turns on when the diskette drive is reading or writing.
Ejects a loaded diskette.
Opens and closes the CD-ROM tray.
Manually ejects a CD if the eject button is inoperable.
2 is green.
3 , diskette drive light , or CD-ROM drive light
7
is on, the drive is either
6
Compaq Deskpro 2000 1-19