3. If the processor has a raised center, install thermal pad number 243226-001 on top of the processor
before installing the heatsink.
If the process or has a flat surface, install thermal pad number 184616-002 before installing the
heatsink.
CAUTION: Using the wrong thermal pad may cause the processor to overheat or short,
resulting in failure.
4. Install the heatsink and the heatsink retaining clip.
Figure 5-76. Installing the Thermal Pad
5. Replace the access panel.
6. Run the Computer Setup utility. Refer to Chapter 7, "Compaq Utilities."
7. Test the system (optional) using the Computer Checkup (TEST) utility. Refer to Chapter 2,
"Troubleshooting."
5-84
Removal and Replacement Procedures