2. Install one high hat screw on the right side of the front of the hard drive.
Figure 5-96. Installing the Flanged Screws into the Hard Drive
3. Install the hard drive assembly into the drive bay and secure the drive with two
retaining screws on the left side of the chassis.
Figure 5-97. Installing the Hard Drive, Drive Bezel, and Retaining Screw
CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can
damage the internal components of the drive.
4. Continue with Step 9.
Compaq Deskpro 2000 5-107