Inboard Expansion Board - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.1.8.1

Inboard Expansion Board

To remove an inboard expansion board follow these steps:
1. Perform preparation procedures described in Section 5.1.3.
2. Remove the system unit cover. (Section 5.1.6).
3. Remove the retaining screw and board retainer bracket that secure the board to the rear of the
computer.
Figure 5-10. Removing the Clip Retaining Screw and the Retainer Bracket
5-12 Removal and Replacement Procedures