5.1.19 Expansion Board Guide
To remove the expansion board guide from the desktop computer, complete the following steps:
1. Perform preparation procedures described in Section 5.1.3.
2. Remove the system unit cover (Section 5.1.6).
3. Remove all expansion boards that are on the outboard side of the computer (Section 5.1.8.2).
4. Remove the front bezel (Section 5.1.15.1).
5. Unsnap the plastic clip on top and rotate the board guide down, then pull out.
Figure 5-51. Removing the Desktop Expansion Board Guide
To replace the expansion board guide, reverse the previous procedure.
Compaq Deskpro 2000 5-55