Compaq DESKPRO 2000 SERIES Maintenance & Service Manual page 190

4. Remove the backing from the adhesive on the hook-and-loop fastener strip, and attach the battery
with the hook-and-loop fastener strip as shown.
Figure 5-15 Installing the Battery on the Minitower
5. Replace the computer access panel.
6. Place the sticker included with your battery kit on the back of your computer above the power
connector.
7. Plug in the computer and reconnect any external devices.
WARNING:
This equipment is designed for connection to a grounded (earthed) outlet.
!
The grounding type plug is an important safety feature. To avoid the risk of electrical
shock or damage to the equipment, do not disable this feature.
8. Turn on the computer.
9. Run the Computer Setup utility to reconfigure the system. Refer to Chapter 7, "Compaq Utilities."
Compaq Deskpro 2000 5-77