Using Configuration And Diagnostics Menu Options - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

3. Press F10 as soon as the cursor moves to the upper-right corner of the screen.
4. If prompted, select the desired language.
5. Press Enter at the Welcome to Compaq Utilities screen.
6. If you load the Diagnostics diskette, a menu similar to the one shown in Figure 2-2 is displayed. If
you select Computer Setup from this menu, you are prompted to insert the Setup diskette. You are
prompted through any procedure that you select.

2.3.3 Using Configuration and Diagnostics Menu Options

The Configuration and Diagnostics menu contains the following utilities:
Computer Setup
Computer Checkup (TEST)
View System Information (INSPECT)
Prepare computer for Compaq Service Call (RemotePaq)
Create a Diagnostics Diskette
Manage Diagnostics Partition
See the user documentation for descriptions of the Security Management and Power Management
utilities. A brief description of each of the troubleshooting utilities is presented below. Ample
prompting is provided with each of these utilities.
The Computer Setup utility is selected from the Configuration and Diagnostics Menu. It is preinstalled
on the hard drive and is also available on diskette. It gives a snapshot of the computer's hardware
configuration, aids in troubleshooting, and allows you to set custom features. Computer Setup
recognizes a newly installed internal or external device and automatically updates the Computer Setup
screen. The following parameters are reported:
Processor and memory
Storage
Input devices
Power management
Video
Communications
Security management
Press F1 for instructions on how to navigate around the screen.
2-10 Troubleshooting