Compaq DESKPRO 2000 SERIES Maintenance & Service Manual page 133

Figure 5-17. Six Memory Module Sockets on the Pentium Pro-Based System Board
Model
Pentium–based system
Pentium Pro–based system
CAUTION:
contacts. Doing so may damage the module.
To install a memory module, complete the following steps:
1. Perform preparation procedures described in Section 5.1.3.
2. Remove the system unit cover (Section 5.1.6).
3. If this is a Pentium-based computer, remove any outboard expansion boards that block the SIMM
sockets (Section 5.1.8.2) and continue with Step 4.
If this is a Pentium Pro-based computer, remove the front bezel (Section 5.1.15) and the drive cage
(Section 5.1.20). Then continue with Step 4.
5-20 Removal and Replacement Procedures
Memory Upgrades
Standard
8-, 16-, or 32-MB DRAM
16- or 32-MB DRAM
When handling a memory module, be careful not to touch any of the
Expandable to:
128-MB DRAM
192-MB DRAM