4. Remove the backing from the adhesive on the hook-and-loop fastener strip, and attach the battery
with the hook-and-loop fastener strip as shown.
Figure 5-14. Installing the Battery on the Desktop
5. Replace the system unit cover.
6. Place the sticker included with your battery kit on the back of your computer above the power
connector.
7. Plug in the computer and reconnect any external devices.
WARNING:
!
The grounding type plug is an important safety feature. To avoid the risk of electrical
shock or damage to the equipment, do not disable this feature.
8. Turn on the computer.
9. Run the Computer Setup utility to reconfigure the system. Refer to Chapter 7, "Compaq Utilities."
5-18
Removal and Replacement Procedures
This equipment is designed for connection to a grounded (earthed) outlet.