5.2.19 Power Supply
To remove the power supply and power supply switch, complete the following steps:
1. Perform preparation procedures described in Section 5.2.3.
2. Remove the access panel (Section 5.2.6.1).
3. Remove the front bezel (Section 5.2.17.1).
4. From outside the chassis, remove the screw that attaches the power switch and its
bracket to the front of the chassis.
5. From inside the chassis, pull the power switch and its bracket free from the chassis.
6. Remove the power supply switch.
Figure 5-86. Removing the Power Supply Switch and Bracket
Compaq Deskpro 2000 5-95