Compaq DESKPRO 2000 SERIES Maintenance & Service Manual page 258

To enable the QuickLock and QuickBlank features from the Configuration and Diagnostics Menu,
complete the following steps:
1. Turn on the computer.
2. When the cursor appears in the upper-right corner of the screen, press F10.
The cursor displays in the upper-right corner of the screen for approximately 2 seconds. If the user
does not press F10 during this time, the user must turn the computer off, then on again to access the
utility.
3. Press Enter to bypass the welcome screens and display the main menu.
Computer Setup
Computer Checkup (TEST)
-----------------------------------------------------------------------
View system information (INSPECT)
Prepare computer for Compaq service call (REMOTEPAQ)
-----------------------------------------------------------------------
Create a Diagnostics Diskette
-----------------------------------------------------------------------
Manage Diagnostic Partition
4. From the main menu, select Computer Setup and press Return or click with the
mouse.
5. From the main menu, select the Security Management feature, and press Enter.
6. When the steps in the Security Management screen display, select View or Edit
Details and press Enter or click with the mouse.
7. Page down to locate the QuickLock password and QuickBlank items on the screen
and follow the instructions provided to enable them.
8. Save the configuration and exit the utility.
7-14 Compaq Utilities
Configuration and Diagnostics