Rear Panel Connectors - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

Drive Configuration
1
Primary hard drive bay (3.5-inch, third-height)
2
Standard 3.5-inch 1.44MB diskette drive
3
Optional diskette drive (5.25-inch or 3.5-inch), tape drive, hard drive or CD-ROM drive (half-height)
4
Optional diskette drive (5.25-inch or 3.5-inch), tape drive, hard drive, or CD-ROM drive (half-height)
5
Primary hard drive bay (5.25-inch, half-height) OR
Optional diskette drive (5.25-inch or 3.5-inch), tape drive, hard drive, or CD-ROM drive (half-height)
To verify the type, size, and capacity of the mass storage devices installed in the computer, run Compaq
Diagnostics in Windows, or run the View System Information (INSPECT) utility available at computer
startup. Refer to Chapter 7, "Compaq Utilities," for more information.
The computer may have either a 5.25-inch hard drive or a 3.5-inch hard drive installed. If the hard
drive is a 5.25-inch drive, it will be installed in location
will be installed in location

1.5.3 Rear Panel Connectors

The following illustration shows the rear panel connectors of the minitower computer. Each connector
is color-coded and includes an icon to help identify its function.
Table 1-7
Compaq Deskpro 2000 Minitower Computer
.
1
5 . If the hard drive is a 3.5-inch drive, it
Compaq Deskpro 2000 1-21