Cache Memory - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.2.13.3 Cache Memory

To install an optional cache module onto a Pentium-based system board, complete the following steps:
1. Perform preparation procedures described in Section 5.2.3.
2. Remove the access panel (Section 5.2.6.1).
3. Remove the riser brace (Section 5.2.7).
4. Install the cache module into the cache connector on the system board.
Figure 5-77. Locating the Cache Connector on the System Board
5. Replace the riser brace.
6. Replace the access panel.
7. Reconnect all the cables and turn on the computer. The computer reconfigures the additional
memory. Refer to Chapter 7, "Compaq Utilities."
Compaq Deskpro 2000 5-85