Installing An Expansion Board - Compaq Deskpro 2000 Series Reference Manual

Installing an
Expansion Board
Five Expansion Slots on the Desktop Computer
-6
5 Upgrading the Desktop Computer
The following sections explain how to install an expansion
board, processor upgrade, additional memory, graphics
memory, and an optional drive. For more complete installation
instructions, refer to the installation guide included with the
equipment.
After installing optional equipment, refer to the sections in this
chapter "When to Reconfigure the Computer in Windows 95,"
"When to Reconfigure the Computer in Windows NT 4.0," or
"When to Reconfigure the Computer in Windows 3.1" to make
sure the computer recognizes the new equipment.
The Compaq Deskpro 2000 Series of Personal Computers
contains the following five expansion slots: three slots are
located on one side of the expansion riser board and two slots
are located on the other side of the expansion riser board.
1 Two PCI (Peripheral Component Interconnect) expansion
slots, one on each side of the expansion riser board.
2 Two ISA (Industry Standard Architecture) expansion slots,
one on each side of the expansion riser board.
3 One PCI/ISA shared expansion slot.