Configure An Ip Acl - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
The binding is removed.
The following table describes the nonconfigurable information on the page.
Table 49. MAC Binding Table
Field
Interface
Direction
ACL Type
ACL ID
Sequence Number

Configure an IP ACL

An IP ACL consists of a set of rules that are matched sequentially against a packet. When a
packet meets the match criteria of a rule, the specified rule action (Permit or Deny) is taken,
and the additional rules are not checked for a match. You must specify the interfaces to which
an IP ACL applies, as well as whether it applies to inbound or outbound traffic.
The following steps are involved in defining an IP ACL and applying it to the switch:
1. Create an IP ACL ID (see
2. Create an IP rule (see
Rules for an Extended IP ACL
3. Associate the IP ACL with one or more interfaces (see
Bindings on page 244).
Add an IP ACL

To add an IP ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
Description
The interface of the ACL assigned.
The selected packet filtering direction for the ACL.
The type of ACL assigned to the selected interface and direction.
The ACL name identifying the ACL assigned to the selected interface
and direction.
The sequence number signifying the order of the specified ACL relative
to other ACLs assigned to the selected interface and direction.
Configure an IP ACL
Configure Rules for a Basic IP ACL
on page 240).
Manage Device Security
234
on page 234).
on page 236 or
Configure IP ACL Interface
Change the Default IP Address of the
Configure