Table of Contents
Advertisement
The setting shows briefly, then
disappears automatically.
Adjusting suspension
damping with DDC
with Dynamic Damping Control
OE
(DDC)
Switching on ignition (
Press button 1 briefly to view
the current setting.
To adjust damping:
Repeatedly press button 1 until
the setting you want to use
appears on the display.
NOTICE
You can adjust the damping
characteristic while the motor-
cycle is on the move.
The following settings are avail-
able:
SOFT
40).
: Comfortable damping
characteristic
NORM
: Normal damping char-
acteristic
HARD
: Sporty damping char-
acteristic
To adjust load:
Repeatedly press button 1 and
hold until the setting you want
to use appears on the display.
NOTICE
The load cannot be set while the
motorcycle is in motion.
The following settings are avail-
able:
One-up
Two-up
Removing/installing
mirrors
Removing mirror
Push protective cap 1 up.
Use the tool from the on-board
toolkit to slacken nut 2.
NOTICE
When removing the right mir-
ror, make sure that the brake-
5
85
z
Advertisement
Table of Contents
