Toner Meter Cycle (Tmc) Card Removal - Lexmark X548 Series Service Manual

7525-63x

Toner meter cycle (TMC) card removal

Remove the right cover. See
1.
2. Remove the waste toner bottle. See
Remove the imaging unit (IU). See
3.
Remove the rear shield. See
4.
Disconnect and remove the toner meter cycle card cable (A).
5.
Note: Observe the cable routing for reinstallation.
6. Remove the two plastic screws (B) and the two metal screws (C), and remove the card.
Service Manual
4-66
"Right cover removal" on page
"Waste toner bottle removal" on page
"Imaging unit (IU) removal" on page
"Rear shield removal" on page
A
4-7.
4-73.
4-63.
4-7.
Previous
Next
Go Back