Lexmark X548 Series Service Manual page 61

Service error messages
Error code
152.xx Service
CMY Cartridge Motor
152.01 Service
CMY Cartridge Motor
152.02 Service
CMY Cartridge Motor
152.03 Service
CMY Cartridge Motor
152.04 Service
CMY Cartridge Motor
152.05 Service
CMY Cartridge Motor
152.06 Service
CMY Cartridge Motor
152.07 Service
CMY Cartridge Motor
8xx.xx service errors
840.01 Scanner
disabled
840.02 Scanner auto
disabled
841
842
843
843.01
844.xx
844
844.01
844.02
Description
Failed to achieve lock for motor within
allotted time.
Timeout waiting for SAP BLDC motor
to reach valid FG speed.
Timeout waiting for
MP_NUM_INITIAL_SAP_HALLS.
Timeout waiting for SAP BLDC motor
FG.
Lost lock for motor.
Excessive SAP BLDC PWM.
Motor stalled in time-based
commutation.
The scanner is disabled and can't be
used.
The scanner is disabled and can't be
used.
Image pipeline
Scanner failure
Scanner failure
Scanner failure
Scanner failure
Front scan module output level error
Rear scan module output level error
Front scan module lamp level too low
Action
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Go to
"Main drive gear assembly (EP
drive) service check" on page
Enter the configuration menu, and re-
enable the scanner module. Go to
error service check" on page
This message is posted when the MFP
PORs. Enter the configuration menu, and
re-enable the scanner module. Go to
"840.xx error service check" on
page 2-59.
Image pipeline ASIC. Go to
"CCD service
2-60. Also,Go to
check" on page
"Flatbed home position service check"
on page 2-61.
Communication failure. Go to
service check" on page 2-60.
Carriage mechanical failure. Go to
"Flatbed motor service check" on
page 2-61.
ADF mechanical failure. Go to
paper jam service check" on page
Lamp failure. Go to
"CCD service check"
on page 2-60.
Go to
"CCD service check" on
page 2-60.
Front Mono channel, Front Color channels,
Front Red channel, Front Green channel,
and/or Front Blue channel is detected to
have low lamp level. Go to
"CCD service
check" on page 2-60.
Diagnostic information
7525-63x
Previous
2-40.
Next
2-40.
Go Back
2-40.
2-40.
2-40.
2-40.
2-40.
2-40.
"840.xx
2-59.
"CCD
"ADF
2-63.
2-17