Fax Error Log Codes - Lexmark X548 Series Service Manual

7525-63x

Fax error log codes

Error code
000
200
3xx
4xx
5xx
6xx
7xx
800
802
803
804
805
808
809
80A
Service Manual
2-24
Description
No error occurred during fax
transmission.
Error occurred when transmitting
training.
Error occurred when receiving image
data.
Error occurred when sending image
data.
Received unknown response from
remote fax device.
Error occurred when receiving a frame.
Error occurred when sending a frame.
Received EOT unexpectedly from the
modem in V.34 mode.
Too many timeouts occurred during
ECM reception.
Fax canceled by user.
Unexpectedly received a disconnect
command from the remote end.
Remote fax device failed to respond to
the DCS command.
T1 timeout occurred when trying to
establish a connection with a remote
fax device.
T2 Timeout occurred due to loss of
command/response synchronization.
T5 Timeout occurred when transmitting
image data to remote fax device.
Action
No action needed.
• Check line quality.
• Select a lower Max Speed value under
Fax Send settings.
• Adjust the transmit level.
• Check line quality.
• Adjust Receive Threshold.
• Select a lower Max Speed value under
Fax Send settings.
• Check line quality.
• Adjust Transmit Level.
• Select a lower Max Speed value under
Fax Send settings.
No action needed. Issue is with the other
device.
• Check line quality.
• Adjust 'Receive Threshold'.
• Check line quality.
• Adjust Transmit Level.
• Select a lower Max Speed value under
Fax Send settings.
If error persists disable V.34 modulation
scheme.
If error persists disable ECM mode.
No action needed.
• Check line quality.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be requesting an
unsupported feature.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be
malfunctioning.
• Adjust Transmit Level/Receive
Threshold values.
• Adjust Transmit Level/Receive
Threshold values.
• Check line quality.
• Adjust Transmit Level.
• Select a lower Max Speed value under
Fax Send settings.
Previous
Next
Go Back