Key Repeat Initial Delay; Key Repeat Rate; Clear Custom Status; Pel Blurring - Lexmark X548 Series Service Manual

Key Repeat Initial Delay

When a key is touched repeatedly, this is the delay before the key begins repeating. The range is 0.25–5
seconds, with increments of 0.25. The default is value is 1 second.
To adjust this setting:
Navigate to Key Repeat Initial Delay.
1.
Touch
2.
3. Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.

Key Repeat Rate

This is the number of presses per second for a repeating key. The range is 0.5–100, with increments of 0.5. The
default value is 15 times per second.
To change this setting:
Navigate to Key Repeat Rate.
1.
Touch
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.

Clear Custom Status

Executing this operation erases any strings that have been defined by the user for the default or alternate
custom messages.
To clear custom status:
Navigate to Clear Custom Status.
1.
Touch Clear Custom Status.
2.
Clear Custom Status appears, and the display returns to the Clear Custom Status menu.
3.

Pel Blurring

This setting enables customers who notice step artifacts in their error diffused copies to activate the pel
synthesis function.
To change this setting:
Navigate to Pel Blurring.
1.
2. Touch
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.

USB Speed

This setting is used to set the throughput of the USB port on the printer. The settings are Auto, which is the
default, and Full. Full forces the USB port to run at full speed and also disables its high-speed capabilities.
To change this setting:
Navigate to USB Speed.
1.
2. Touch
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
or to adjust the setting.
or to adjust the setting.
or to adjust the setting.
or to change the setting.
7525-63x
Previous
Go Back
Diagnostic aids
3-41
Next