Adf Cover Open Sensor Test - Lexmark X548 Series Service Manual

7525-63x
Press and hold the FB cover actuator (A).
3.
The value of FB Cover: should change from 1 to 0 if the sensor is working properly.
4.
Press
5.

ADF cover open sensor test

This test verifies the functionality of the ADF cover closed sensor. To test this sensor. perform the following
steps:
ADF Cover Open: 0 appears.
1.
Lift the ADF top cover.
2.
The value of ADF Cover Open: should change from 0 to 1 if the sensor is working properly.
3.
Press
4.
Service Manual
3-28
A
to return to SCANNER TESTS.
to return to SCANNER TESTS.
Previous
Next
Go Back