High-Voltage Power Supply (Hvps) With Spring Assembly Removal - Lexmark X548 Series Service Manual

7525-63x

High-voltage power supply (HVPS) with spring assembly removal

1. Remove the left cover.
Note: There should be a leaf spring (A) biasing the HVPS upward.
Remove the rear shield. See
2.
3. Remove the RIP board. See
Disconnect the high-voltage power supply (HVPS) cable from the HVPS.
4.
Service Manual
4-40
"Rear shield removal" on page
"RIP board removal" on page
4-7.
4-19.
Previous
Next
Go Back