7525-63x
USB PnP
This setting is used to improve the MFP's compatibility with the host PC.
Note: Some PCs contain chipsets that may be incompatible with this MFP.
To change this setting:
Navigate to USB PnP.
1.
2.
Touch
or
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
Automatically Display Error Screens
To change this setting:
1.
Navigate to Automatically Display Error Screens.
Touch
or
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
Exit Config Menu
This setting appears as a button on the bottom right-hand corner of the display and is always accessible from
the Configuration Menu.
Touch this to exit the Configuration Menu. The printer performs a POR and starts in normal mode.
Service Manual
3-42
to change the setting.
to change the setting.
Previous
Next
Go Back