7525-63x
Scanner left cover removal
Remove the flatbed assembly. See
1.
2.
Release the tabs (A) securing the left flatbed cover to the flatbed unit using a small flat-blade screwdriver.
Scanner right cover removal
Remove the imaging unit in the print engine. See
1.
2.
Raise the scanner assembly to the up position, and lock in place.
Remove the four screws (A) securing the right scanner cover to the flatbed unit.
3.
Service Manual
4-94
"Flatbed removal" on page
A
"Imaging unit (IU) removal" on page
A
4-75.
4-63.
Previous
Next
Go Back