Fuser Drive Motor Assembly Removal - Lexmark X548 Series Service Manual

7525-63x

Fuser drive motor assembly removal

Open the front cover.
1.
2. Remove the right cover. See
Disconnect the cable (A) from the fuser drive motor assembly.
3.
Note: If the toroid (B) is removed from the cable, be sure to reinstall the toroid when reconnecting the
cable.
4. Remove the two screws (C).
Remove the fuser drive motor assembly.
5.
Service Manual
4-36
"Right cover removal" on page 4-7.
Previous
Next
Go Back