Lexmark Pro910 Series
Tank contact card removal
Warning: Do not touch the metal contacts on the card.
Note: Use a #1 Phillips screwdriver for this procedure.
1.
Remove the jam clearance cover. See
2.
Move the printhead carrier to the middle, and remove the printhead.
3.
Remove the two screws (A) securing the metal plate (B).
4.
Remove the tank contact card from the housing.
5.
Disconnect the cable (C) to detach the tank contact card.
4-18
Service Manual
"Jam clearance cover removal" on page
C
4-17.
Previous
Next
Go Back
Disassembly
Flowchart