Fuser Exit Sensor Removal - Lexmark X548 Series Service Manual

Fuser exit sensor removal

1. Open the front cover.
Remove the right cover assembly. See
2.
3. Remove the left cover. See
Disconnect the two-wire fuser cable (A) from the LVPS.
4.
Note: You do not have to extract the cable.
Remove the screw and grounding washer (B) on the right side of the frame.
5.
Note: Be careful not to lose the grounding washer.
Disconnect the thermistor cables (C).
6.
"Right cover removal" on page
"Left cover removal" on page
A
4-7.
4-4.
Repair information
7525-63x
Previous
Next
Go Back
4-37