7525-63x
Scanner 2nd sensor test
This test verifies the functionality of scan Sensor 2. To test this sensor, perform the following steps:
Scan 2nd Sensor: 0 appears.
1.
Lift the ADF top cover, and close the ADF cover sensor (A) by pressing down on the ADF sensor actuator
2.
with a small flat-blade screwdriver.
Move the Sensor 2 actuator by inserting a small screwdriver into the hole (B) and gently toggling the
3.
actuator. The value of Sensor 2: should change from 0 to 1 if the sensor is working properly.
4.
Press
Service Manual
3-30
to return to SCANNER TESTS.
A
B
Previous
Next
Go Back