Toner Meter Cycle (Tmc) Card Removal - Lexmark CX310 Service Manual

3
Remove the two screws (C).
4
Remove the fuser drive motor assembly.

Toner meter cycle (TMC) card removal

1
Remove the imaging unit. See
2
Remove the rear cover. See
3
Disconnect the TMC cable from JCTM1 connector (A), and push the toner meter cycle card cable through the frame
opening.
Note: Pay close attention to the routing of the cable for reinstallation.
"Imaging unit (IU) removal" on page
"Rear cover removal" on page
Repair information
258
267.
307.
7527