Menu Key Combinations - Lexmark X548 Series Service Manual

Menu key combinations

There are different test menus that can be accessed during POR to identify problems with the printer.
Configuration Menu
1 @!. 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
8 9 WXYZ
7 PQRS TUV
0 #
Diagnostics Menu
Invalid Engine Code
Mode
These menus do not require a POR to access them:.
Network SE Menu
Fax SE Menu
SE Menu
Firmware update
from USB
1. Turn off the printer.
2. Press and hold 2 and 6
simultaneously.
3. Turn on the printer.
4. Release the buttons when the
splash screen appears.
1. Turn off the printer.
2. Press and hold 3 and 6
simultaneously.
3. Turn on the printer.
4. Release the buttons when the
splash screen appears.
1. Turn off the printer.
2. Press and hold 3, 4, and 6
simultaneously.
3. Turn on the printer.
4. Release the buttons when the
splash screen appears.
1. Touch .
2. Navigate to Networks/Ports >
Standard Network >
Std Network Setup.
3. Press and hold 6, 7, and 9
simultaneously.
Enter **411 while in the Home
Prime screen.
From a Web browser on a host
PC, add /se to the printer IP
address.
For use on machines with
operator panel USB.
The Configuration Menu group contains a set of
menus, settings, and operations which are
infrequently required by a user. Generally, the
options made available in this menu group are
used to configure a printer for operation.
Go to
"Configuration Menu" on page 3-32
more information.
The Diagnostics Menu group contains the settings
and operations used while manufacturing and
servicing the printer.
Go to
"Diagnostics Menu (Diag Menu)" on
for more information.
page 3-6
This mode is used if the machine has invalid code
and needs the correct code loaded. After entering
this mode, the firmware code can be updated.
This menu contains settings for fine tuning the
communication settings for the network interfaces
and protocols.
This should be used only under the guidance of
second-level support. See
"Fax transmission
service check" on page 2-67 and"Fax reception
service check" on page 2-68.
See
"Updating printer firmware" on page
7525-63x
Previous
Next
Go Back
for
3-54.
Diagnostic aids
3-5