Lexmark X548 Series Service Manual page 266

7525-63x
Remove the steel hinge stud (K). Save this for use on the replacement flatbed.
21.
Remove the redrive unit (L). See
22.
Remove the cable cover plates and scanner homing plates (M). These will be used on the replacement
23.
flatbed unit.
Warning: When replacing the rear cable cover plate, the cables must be routed as shown above. Failure
to do so could damage the cables and lead to possible paper skews and jamming.
Service Manual
4-80
K
"Redrive unit removal" on page
L M
4-93.
Previous
Next
Go Back