Lexmark X548 Series Service Manual page 56

7525-63x
2xx paper jam messages
Error code
291.00 Scanner Jam,
remove all originals
from the scanner
291.01 Scanner Jam,
remove all originals
from the scanner
292 Scanner jam,
remove all originals
from the scanner
293 Replace all
originals if restarting
job
293.02 Flatbed cover
open
294.04 Scanner jam,
remove all originals
from the scanner
294.05 Scanner jam,
remove all originals
from the scanner
Service Manual
2-12
Description
Scanner ADF detects paper at the
second scanner sensor while the ADF
is in an idle state.
This message is posted if a jam is
detected at the first scanner sensor.
This message appears if the ADF
cover is open while paper is fed
through the ADF.
No paper sensed in the ADF.
The MFP senses that the flatbed cover
is open.
Jam at the ADF exit sensor.
A jam is detected at the ADF exit
sensor.
Action
Open the ADF cover to access the jam
area. Remove all the jammed pages. See
Go to
"291.xx ADF paper jams" on
page 3-54.
Open the ADF cover to access the jam
area. Remove all the jammed pages. See
Go to
"291.xx ADF paper jams" on
page 3-54.
Remove the paper from the ADF, and
close the ADF cover. If the error recurs, go
to
"ADF cover open service check" on
page 2-62.
Ensure that the paper present actuator is
in the correct position. Go to
jam service check" on page
Close the flatbed cover. Go to
open service check" on page
Remove all paper from the ADF. If the
error recurs, go to
"ADF paper jam
service check" on page 2-63.
Previous
Next
Go Back
"ADF paper
2-63.
"ADF cover
2-62.