Ann-I/O Led Driver Module - Fire-Lite MS-9200UDLS Manual

Installation

ANN-I/O LED Driver Module


ANN-I/O Board Layout
Figure 2.23 illustrates the ANN-I/O board showing locations of screw terminals for connection to
the FACP, pin connectors for connecting LEDs and the DIP switch for selecting the ANN-BUS ID
number.

Specifications
• Max. ANN-BUS Voltage: 28 VDC
• Max. Current:

Alarm: 200 mA

Standby: 35 mA

Each LED: 10 mA
• Operating Temperature: 32°F to 120°F (0°C to 49°C)
• For indoor use in a dry location only
52
Terminals not used (future)
ANN-BUS Connector
Figure 2.23 ANN-I/O Board Layout
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Optional Module Installation
ANN-BUS (ID#)
Address DIP
switch