Onboard Dact - Fire-Lite MS-9200UDLS Manual

Programming
The Reset Button Enable (RST BTN ENABLE) option allows the programmer to select whether the
Reset button on any installed ANN-80 annunciator will function normally or always be ignored.
Pressing 2 while viewing the ANN-80 Options Screen #2 causes the display to toggle between Rst
Btn Enable Yes (Reset button functions normally) and Rst Btn Enable No (Reset button never
functions).
The Drill Button Enable (DRL BTN ENABLE) option allows the programmer to select whether the
Drill button on any installed ANN-80 annunciator will function normally or always be ignored.
Pressing 3 while viewing the ANN-80 Options Screen #2 causes the display to toggle between Drl
Btn Enable Yes (Drill button functions normally) and Drl Btn Enable No (Drill button never
functions).

Onboard DACT

OPTION MODULES
1=ANNUNCIATORS
The Onboard DACT (Digital Alarm Communicator/Transmitter) provides communication to a
2=ON BOARD DACT
3=PRINTER/PC
central station. Pressing 2 while viewing the Option Module Screen will cause the following
Option Module Screen
screens to be displayed:

To enable the onboard DACT, press 1 while viewing Onboard DACT Screen #1 until the display
reads Enabled Yes. The display will toggle between Enabled Yes and Enabled No with each press
of the key.

Press 2 while viewing On Board DACT Screen #1 to program the type of primary phone line being
connected to the DACT. The following screen will be displayed:
To select the type, press 1 while viewing the Primary Phone Line screen. The following screen will
be displayed:
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break ratio of 67/33 or 3
to select Rotary dialing with a make/break ratio of 62/38.

ON BOARD DACT
1=ENABLED
2=PRIMARY PHONE Press 3 while viewing On Board DACT Screen #1 to program the type of secondary phone line\
3=SECONDARY PHONE
being connected to the DACT. The following screen will be displayed:
On Board DACT Screen #1
118
ON BOARD DACT
1=ENABLED
2=PRIMARY PHONE
3=SECONDARY PHONE
On Board DACT Screen #1
Onboard DACT Enable
Primary Phone
Secondary Phone
1=SERVICE TERMINAL
YES
2=CENTRAL STATION
3=SUPERV PHONE LINE
On Board DACT Screen #2
ON BOARD DACT
PRIMARY PHONE LINE
1=TYPE TOUCHTONE
Primary Phone Line Screen
PHONE LINE
1=TOUCHTONE
2=ROTARY 67/33
3=ROTARY 62/38
Primary Phone Type Screen
ON BOARD DACT
SECONDARY PHONE LINE
1=TYPE TOUCHTONE
Secondary Phone Line Screen
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Master Programming Level
ON BOARD DACT