Ann-Lc Lite-Connect Module - Fire-Lite MS-9200UDLS Manual

Installation

ANN-RLY Board Layout and Connection to FACP
Figure 2.30 illustrates the ANN-RLY board showing locations of screw terminals for connection to
the FACP and the DIP switches for selecting the ANN-BUS ID number.
ANN-BUS (ID#)
Address DIP switch

ANN-LC Lite-Connect Module


Specifications
• Operating Voltage: 24 VDC
• Max. Current: 150 mA
• Operating Temperature: 32°F to 120°F (0°C to 49°C)
• For indoor use in a dry location only

Installation
Ensure that all power (AC and DC) has been removed from the FACP before installing the commu-
nication module.
58
1 2 3 4 5 6 7 8
TB2
TB4
TB5
TB3
TB6
ANN-BUS
TB1
+24 VDC -24 VDC
+ -
TB1
TB2
JP7
+ -
+ 24V - + 24V -
1
REMOTE PWR
NON-RST RST
2
SUPPLY SYNC
POWER POWER
3
MS-9200UDLS
Figure 2.30 ANN-RLY Board Layout and Connection to FACP
ANN-BUS and power wiring are
ANN-RLY
supervised and power-limited
Primary ANN-BUS
ANN SLC SLC SHIELD
TB9 TB10 SLC SLC
B+ A+ B- A- A
ACS
A B
+ -
MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Optional Module Installation
B