Cylinder Removal / Inspection - Sym MB10A7-A series Service Manual

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com

Cylinder Removal / Inspection

Remove the cylinder head (refer to Chapter
7).
Remove the cylinder head gasket and dowel
pins.
Remove the cam chain guide.
Remove the cylinder.
Caution
Prevent the cam chain falling into the
crankcase when removing the cylinder
Remove the cylinder gasket, dowel pins and
o-ring.
Clean all the gasket material from the sealing
surface.
Caution
Use solvent to wet the gasket material in
order to remove it more easily.
Do not damage the sealing surface
during operation
To this chapter contents
Dowel pins
Cam chain guide
8. Cylinder / Piston
Cam chain
Gasket
Dowel
pins
O ring
8-3