Sym MB10A7-A series Service Manual page 162

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Remove the steering upper / bottom ball race
by driver and rubber hammer.
Remove the steering bottom cone race from
the steering stem.
Caution
Do not do harm to the frame and steering
stem.
Installation
Install a new steering bottom cone race onto
the steering stem and lubricate with grease.
Install the steering upper / bottom ball race to
the right position.
Caution
Do not let the ball race lean on one side
during installation.
Coat the upper / bottom ball race with grease
and install the steering balls.
To this chapter contents
10. Steering / Front Wheel /Front Suspension / Front Brake
Steering bottom cone race
Steering upper ball race
Steering stem locknut
Steering steel balls
Bottom cone race
Steering bottom ball race
Upper cone race
Upper ball race
Bottom ball race
10-17