Sym MB10A7-A series Service Manual page 56

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
F loat Chamber / Jet Set
5 B
Remove 2 mounting screws and remove float
chamber cover.
Warning
Please fill the gasoline in float chamber
into the fuel tank.
Remove the float pin.
Remove the float and float valve.
Inspection
Check the float valve and valve seat for any
damage or blocking.
Caution
In case of worn out or dirty, the float valve
and valve seat will not close tightly. The
fuel will overflow. A worn out or dirty float
valve must be replaced with a new one to
fix the problem.
To this chapter contents
Float
Check if worn out
3. Fuel System
2 screws
Float pin
Float valve
Float pin
3-7