Sym MB10A7-A series Service Manual page 143

To this chapter contents
9. Crankshaft / Crankcase / Shifting Gear / Kick Starter
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Install the crankshaft onto the right crankcase.
Install the crankcase gasket and dowel pins.
Dowel pins
Assemble the left crankcase to the right
7 bolts
crankcase.
Tighten the locknuts on the left crankcase.
Torque value：0.8~1.2kgf-m
Apply some grease to the oil seal of the
counter shaft and then knock the oil seal in
slightly.
Gear indication drill
Install the gear indication drill and spring.
2 screws
Install the gear change switch (2 screws).
9-14