Sym MB10A7-A series Service Manual page 171

11. Rear Wheel / Rear Suspension / Rear Brake
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Rear wheel hub
Check the rear wheel hub for wear or
damage.
Replace it if necessary.
Measure the inner diameter of the wheel hub.
Service limit：111.0mm
Caution
Rub the wheel hub with #120 sandpaper
if it is rusty.
Measure the inner diameter of the wheel
hub by a vernier caliper.
Brake shoes
Measure the brake lining thickness on three
points (2 ends and the middle).
If the brake lining thickness is below service
limit or contaminated by grease, replace it with
new one.
Front ：2.0 mm
Service limit：
Rear ：2.0 mm
11-6
To this chapter contents