Sym MB10A7-A series Service Manual page 118

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Rotate the crankshaft counterclockwise to
match the TDC mark "T".
Install the cam chain sprocket.
Install the cam chain onto the sprocket and
align the timing mark on the sprocket with that
of cylinder head.
Tighten the sprocket mounting bolts.
Torque value：1.0~1.2kgf-m
Install the cylinder head side cover (2 bolts).
Torque value：0.8~1.2kgf-m
Install the tappet adjusting hole caps (4 bolts
for 2 caps).
Torque value：0.8~1.2kgf-m
To this chapter contents
Timing mark
2 bolts
2 bolts
7. Cylinder Head / Valve
TDC mark "T"
2 bolts
7-17