Sym MB10A7-A series Service Manual page 84

To this chapter contents
4. Lubrication / Clutch / Transmission
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Install the oil pump (3 screws).
Oil pump drive gear
Torque value：0.4~0.6kgf-m
Install the oil pump drive gear onto the
crankshaft and make the teeth of oil pump
drive gear and driven gear coordinate.
3 screws
Install the primary drive gear. Primary drive gear
Clutch cam plate
Install the clutch assembly and clutch lever.
Clutch lever
8 bolts
Install the location pin and new right
crankcase cover gasket.
Install the right crankcase cover (8 bolts).
Torque value：0.8~1.2kgf-m
4-19