Sym MB10A7-A series Service Manual page 202

To this chapter contents
12. Electrical System
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Switch / Horn
Main switch
Inspection
Turn the main switch cover counterclockwise
and remove the cover.
Remove the body cover.
Main switch cover
Disconnect the main switch coupler.
Main switch coupler
Check the circuit between two points as
Black
indicated in the table below.
Green
Black/White
BAT1 BAT2 IG E
OFF
ON
Wire color Red Black B/W Green
Red
Green
1 bolt for each side
Replacement
Remove the main switch cover and front cover
protector.
Remove the front cover (6 bolts).
Disconnect the main switch wire coupler.
Remove the main switch brocket (3 bolts).
Remove the main switch from the brocket.
Installation
Install in the reverse order of removal.
1 bolt
12-21